Glass Savers removes post-construction scratches from new windows, doors and storefronts in Dallas, on-site with the glass in the frame. We are based in Austin and take construction projects across Texas.
Call (512) 626-1270 or text photos for a free estimate. Quote requests get a same-day reply.
Last updated November 13, 2026.
I'm Doug MacDonald, president and lead tech at Glass Savers. I have been resurfacing scratched glass since 2009. Construction damage is most of what we see on new builds: the glass goes in early, then every trade works around it.
What scratches new glass on a construction site?
- Razor blades. Crews scrape off labels, tape and film. On tempered glass the blade drags factory debris across the surface.
- Fabrication debris. Tiny particles baked into tempered glass during manufacturing. They are invisible until the first cleaning drags them.
- Stucco and concrete splatter. It bonds to the glass as it cures. Scraping it off leaves more scratches.
- Welding slag. Hot metal fuses to the glass on contact.
- Final cleaning. Window cleaners working on dirty new glass can scratch a whole elevation.
How we fix it
- You send photos. We tell you whether it can be fixed and give you a price.
- On larger projects we offer an on-site demo first, so you can see the result on your own glass.
- We grind past the damage with progressively finer abrasives and feather the edges so the repair blends in.
- We polish the glass back to clear with cerium oxide. The glass stays in the frame the whole time.
What a GC or builder should know
| Item | Details |
|---|---|
| Pricing | Out-of-town projects, more than 3 hours from Austin, start at $10,000, with travel and lodging extra. Full resurfacing starts at $40 per square foot. Restoring typically saves 50-80% versus replacing the window or door. |
| Insurance | $2M liability insurance. We can add your company as additional insured at no cost, and send a COI on request. |
| Scope | Scratch removal and glass resurfacing only. No glass installation and no crack or chip repair. |
| Quality | As close to perfect as humanly possible. We welcome a side-by-side demo with any company. Minor optical variance under direct sun or at sharp angles is normal, and scratches very close to the edge or frame may remain. |
| What the site needs | Access, power, and clean, dry glass with film removed. Scaffolding for second-story glass. Aerial, boom and scissor lifts can't be used. |
Real post-construction jobs
We have not published a Dallas job yet. These are real projects from our case studies:
- Restoring oversized glass panels in Austin, TX (March 2025).
- Razor blade scratches on oversized tempered glass doors (August 2022).
- Window cleaning scratches after construction in Augusta, GA.
- San Diego storefront: post-construction cleaners scratched 40+ storefront panels. Replacement was quoted at $120,000. Restoration cost $18,500, and the building opened on time.
More on the damage types: razor blade scratches, fabrication debris on tempered glass, and the contractor guide to construction glass damage.
Questions
Do you work on construction projects in Dallas?
Yes. We are based in Austin and take post-construction scratch removal projects in Dallas and across Texas. Send photos and the number of panes, and we will price it.
How much does a Dallas project cost?
Dallas is an out-of-town project for us. Out-of-town projects, more than 3 hours from Austin, start at $10,000, with travel and lodging extra. Full resurfacing starts at $40 per square foot.
Can scratched tempered glass be fixed without replacing it?
Yes, in most cases. We resurface tempered, laminated, annealed and dual pane glass in place. Restoring typically saves 50-80% versus replacing the window or door.
Can you be added as additional insured?
Yes. Glass Savers carries $2M liability insurance and can add your company as additional insured at no cost. We send a COI on request.
What do you need on site?
Access, power, and clean, dry glass with the film removed. Second-story glass needs scaffolding. Aerial, boom and scissor lifts can't be used.
Can you do a demo first?
Yes. On larger projects we offer an on-site demo before the full job. We welcome a side-by-side demo with any company.
