Yes. Glass Savers resurfaces construction-scratched windows, doors and storefront glass in Houston, on-site with the glass in the frame. We are based in Austin and take Houston post-construction projects.
Call (512) 626-1270 or text photos for a free estimate. Quote requests get a same-day reply.
Last updated November 13, 2026.
New glass gets scratched on a lot of builds. Usually it shows up at the final clean or on the punch list walk, when the film comes off and the light hits it right. The question is whether the glass has to come out. In most cases it does not.
Repair or replace: how to decide
| Situation | Usually |
|---|---|
| Surface scratches from razor blades, cleaning or debris | Resurface in place |
| Stucco, concrete or welding slag damage | Resurface in place after the material is removed |
| Cracked glass | Replace. We do not repair cracks |
| Scratches right at the edge or under the frame | May remain. Send close-up photos |
How we fix it
- You send photos. We tell you whether it can be fixed and give you a price.
- On larger projects we offer an on-site demo first, so you can see the result on your own glass.
- We grind past the damage with progressively finer abrasives and feather the edges so the repair blends in.
- We polish the glass back to clear with cerium oxide. The glass stays in the frame the whole time.
Before you book
| Item | Details |
|---|---|
| Pricing | Out-of-town projects, more than 3 hours from Austin, start at $10,000, with travel and lodging extra. Full resurfacing starts at $40 per square foot. Restoring typically saves 50-80% versus replacing the window or door. |
| Insurance | $2M liability insurance. We can add your company as additional insured at no cost, and send a COI on request. |
| Scope | Scratch removal and glass resurfacing only. No glass installation and no crack or chip repair. |
| Quality | As close to perfect as humanly possible. We welcome a side-by-side demo with any company. Minor optical variance under direct sun or at sharp angles is normal, and scratches very close to the edge or frame may remain. |
| What the site needs | Access, power, and clean, dry glass with film removed. Scaffolding for second-story glass. Aerial, boom and scissor lifts can't be used. |
Real post-construction jobs
We have not published a Houston job yet. These are real projects from our case studies:
- Post-construction window cleaning scratches in Augusta, GA, an out-of-state project.
- Construction scratches removed in Encinitas, CA.
- Razor blade scratches on oversized tempered glass doors (August 2022).
"He literally resolved issues on over 10+ units of glass. This fix by Doug saved hundreds of thousands of dollars in labor and materials, but more importantly TIME."
Colin Itzko, President and CEO, IGM Inc.
See also post-construction glass repair in Austin and large glass resurfacing projects.
Questions
Do you take post-construction jobs in Houston?
Yes. We are based in Austin and travel to Houston for post-construction scratch removal. Send photos and a pane count for a price.
How much does a Houston project cost?
Houston is an out-of-town project for us. Out-of-town projects, more than 3 hours from Austin, start at $10,000, with travel and lodging extra. Full resurfacing starts at $40 per square foot.
Is resurfacing cheaper than replacing new glass?
Usually. Restoring typically saves 50-80% versus replacing the window or door, and there is no reglazing or reinstall.
Are you insured for commercial sites?
Yes. $2M liability insurance, additional insured at no cost, and a COI on request.
Can you work from a lift?
No. Aerial, boom and scissor lifts can't be used. Second-story glass needs scaffolding.
